SEACON Technical Data - SEACON

Technical Data

RUBBER AND SPECIALIZED MOLDED CABLE ASSEMBLIES

SEACON can offer a comprehensive solution for all of your rubber molding requirements from connector design to a complete cable assembly for most applications.

Neoprene, hypalon and other rubber materials used in the manufacture of molded products all comply with strict testing procedures including hydrostatic, electrical and environmental, performed by our experienced quality personnel. SEACON also molds in polyurethane and chockfast orange epoxy for specialized military requirements and other high temperatures epoxies for hostile environments where reliability is critical.

Our assemblies are being used by the U.S. Navy on both surface ships and submarines including the Deep Sea Rescue (D.S.R.V.).  Mine countermeasure and sonar systems for the military along with commercial applications where high performance is required, such as down hole monitoring and undersea exploration, all utilize SEACON assemblies.

We follow strict in-house and government approved molding procedures for the manufacture of high performance molded assemblies.  From large diameter shielded cable to the extremely small single conductor cable, with polyurethane, neoprene or polyethlene jackets; all are standard for us.  Please contact us with your requirements.

ELECTRICAL CABLES

No.Of CDRS Cable Part No. CDR Size CDR Matl. CDR Insul. Outer Jacket Ø DC (V) Amps Per CDR DC Res. Ohms Per 1,000 ft WT. Per 1,000 ft Break. Str.
1 IN2 20 awg Cad Bronze Rubber Neoprene 0.149 300 3 12 16 65
1 IN2-T 20 awg Cad Bronze Teflon® * Neoprene 0.148 600 3 12 13 65
1 16/1 SO 16 awg Copper Rubber Neoprene 0.210 600 10 4.2 30 80
1 14/ SO 14 awg Copper Rubber Neoprene 0.260 600 15 2.6 45 115
1 8/1 SO 8 awg Copper Rubber Neoprene 0.440 600 45 0.65 135 280
1 0/1 SO 0 awg Copper Rubber Neoprene 0.750 600 200 0.10 550 3075
COAX
1+SHLD CN4 (RG 58) 20 awg Copper Fep Neoprene 0.251 5000 4 11 46 50
1+SHLD CN5 (RG 58) 20 awg Copper Fep Neoprene 0.300 5000 4 11 57 50
2+SHLD 2N5-S 20 awg Cad Bronze Rubber Neoprene 0.375 600 4 12 78 200
2 18/2 SO 18 awg Copper Rubber Neoprene 0.390 600 7 6.7 86 75
2 16/2 SO 16 awg Copper Rubber Neoprene 0.405 600 10 4.2 94 140
2 14/2 SO 14 awg Copper Rubber Neoprene 0.530 600 15 2.6 158 225
2 8/2 W 8 awg Copper Rubber Neoprene 0.810 600 35 0.65 370 1000
3 3N5 20 awg Cad Bronze Rubber Neoprene 0.343 600 3 12 60 200
3 18/3 SO 18 awg Copper Rubber Neoprene 0.370 600 7 6.7 95 125
3+SHLD 18/3 SO S 18 awg Copper Rubber Neoprene 0.345 600 7 6.7 102 145
3 16/3 SO 16 awg Copper Rubber Neoprene 0.427 600 10 4.2 110 210
3 14/3 SO 14 awg Copper Rubber Neoprene 0.560 600 15 2.6 184 260
3 12/3 SO 12 awg Copper Rubber Neoprene 0.635 600 20 1.2 244 320
3 8/3 W 8 awg Copper Rubber Neoprene 0.910 600 50 0.65 480 1500
4 18/4 SO 18 awg Copper Rubber Neoprene 0.435 600 6 7.0 112 175
4 16/4 SO 16 awg Copper Rubber Neoprene 0.485 600 8 4.8 144 280
4 14/4 SO 14 awg Copper Rubber Neoprene 0.605 600 12 2.8 224 340
4 12/4 SO 12 awg Copper Rubber Neoprene 0.665 600 16 1.2 282 400
4 8/4 W 8 awg Copper Rubber Neoprene 0.990 600 45 0.65 630 2000
5 18/5 SO 18 awg Copper Rubber Neoprene 0.495 600 6 7 128 230
5 16/5 SO 16 awg Copper Rubber Neoprene 0.525 600 8 4.9 156 260
6 18/6 SO 18 awg Copper Rubber Neoprene 0.525 600 6 7 146 250
6 16/6 SO 16 awg Copper Rubber Neoprene 0.565 600 8 4.9 178 290
6+SHLD 18/6 SO S 18 awg Copper Rubber Neoprene 0.555 350 6 7 145 280
6+SHLD Columbia 01206 18 awg Copper Rubber Neoprene 0.370 450 6 7 130 200
7 18/7 SO 18 awg Copper Rubber Neoprene 0.565 600 5 7.5 165 280
7 16/7 SO 16 awg Copper Rubber Neoprene 0.605 600 7 5.4 202 320
8 18/8 SO 18 awg Copper Rubber Neoprene 0.600 600 5 7.5 184 300
8 16/8 SO 16 awg Copper Rubber Neoprene 0.645 600 7 5.4 222 350
10 18/10 SO 18 awg Copper Rubber Neoprene 0.640 600 5 7.5 208 360
10 Columbia #3610 20 awg Copper Rubber Neoprene 0.410 350 3
12 18/12 SO 18 awg Copper Rubber Neoprene 0.660 600 5 7.5 225 370
12 16/12 SO 16 awg Copper Rubber Neoprene 0.740 600 7 5.4 305 420
16 18/16 SO 18 awg Copper Rubber Neoprene 0.760 600 5 7.5 314 440
16 16/16 SO 16 awg Copper Rubber Neoprene 0.825 600 7 5.4 386 600
20 18/20 SO 18 awg Copper Rubber Neoprene 0.835 600 5 7.5 378 510
24 18/24 SO 18 awg Copper Rubber Neoprene 0.910 600 5 7.5 434 560
30 18/30 SO 18 awg Copper Rubber Neoprene 0.995 600 4 8.8 542 1190
37 18/37 SO 18 awg Copper Rubber Neoprene 1.072 600 4 8.8 656 1475
40 18/40 SO 18 awg Copper Rubber Neoprene 1.136 600 4 8.8 703 1550
60 18/60 SO 18 awg Copper Rubber Neoprene 1.301 600 4 8.8 953 1850
60 16/60 SO 16 awg Copper Rubber Neoprene 1.465 600 5 7.0 1260 2400

NOTES:
*Registered trademark for DuPont
Kevlar Braid, Center Stress Core and Armour Terminations are available. Please contact SEA CON® for further information.

Back to top

ELECTRICAL CONTACT SIZES

CONTACT AWG DIAMETER (INCHES) AMPACITY (AMPS)
#28 AWG 0.015 0.5
#22 AWG 0.031 2.5
#20 AWG 0.040 4
#16 AWG 0.062 13
#14 AWG 0.093 16
#10 AWG 0.125 23
#8 AWG 0.156 50
#6 AWG 0.218 65
#4 AWG 0.255 90
#1/0 AWG 0.355 200

NOTES:
The ampacity is computed at temperature range of +30°F +68°F.
Above 70°F the ampacity drops.
Pins and sockets are brass alloy. Pins are gold plated per MIL-G-45204.
Most contacts conform to MIL-C-24217.

Back to top

MAXIMUM CABLE O.D

ALL-WET CONNECTORS

TYPE OF CONNECTOR MAXIMUM CABLE O.D
AWL ½ (0.500)
AWM 7-8 (0.875)
AWO 1 ¼ (1.250)
FAWL 3/8 (0.375)

Back to top

GLASS REINFORCED EPOXY SERIES

TYPE OF CONNECTOR MAXIMUM CABLE O.D
XSEE-CCP 1 (1.000)
XSEE-CCP-R/A 1 (1.000) STRAIGHT & ½ (0.500) RIGHT ANGLE
XSEE-CCR 5/8 (0.625)
XSJ-CCP 7/8 (0.875)
XSJ-CCP-R/A ½ (5.00)
XSJ-CCR ¾ (0.750)
XSJ-CCR-R/A ¾ (0.750)
XSJJ-CCP 7/8 (0.875)
XSJJ-CCP-R/A ½ (0.500)
XJSS-CCR ¾ (0.750)
XSJJ-CCR-R/A ¾ (0.750)
XSL-CCP 7/8 (0.875)
XSL-CCP-R/A ¾ (0.750)
XSL-CCP-DOUBLE-R/A 15/16 (0.937)
XSL-CCR-R/A 1 3/8 (1.375)
XSL-CCR 7/8 (0.875)
XSM-CCP 1 1/8 (1.125)
XSM-CCP-R/A 1 ¼ (1.250)
XSM-CCR 1 1/8 (1.125)
XSM-CCR-R/A 1 ¼ (1.250)

Back to top

METAL SHELL SERIES

TYPE OF CONNECTOR MAXIMUM CABLE O.D
SDVG OR MSSG 1 ¾ (1.750)
SDVG OR MSSG ¾ (0.750)
SDVG OR MSSG ½ (0.500)
MSSK-CCP 15/16 (0.937)
MSSK-CCP-R/A 7/8 (0.875)
MSSK-CCR 13/16 (0.812)
MSSL-CCP 1 (1.000)
MSSL-CCP-R/A 1 (1.000)
MSSL-CCR 1 (1.000)
MSSM-CCP 1 3/16 (1.812)
MSSM-CCP-R/A 1 7/32 (1.218)
MSSM-CCR 1 ¼ (1.250)
MSSO-CCP 1 ¾ (1.750)
MSSO-CCP-R/A 1 ¾ (1.750)
MSSO-CCR 1 ¾ (1.750)
MSSP-CCP 1 7/8 (1.875)
MSSP-CCP-R/A 1 7/8 (1.875)
MSSP-CCR 1 7/8 (1.875)
MSSQ-CCP 1 15/16 (1.937)
MSSQ-CCP-R/A 2 ½ (2.500)
MSSQ-CCR 1 ¾ (1.750)
MSSS-CCP 3 ½ (3.500)

Back to top

PENETRATORS

TYPE OF CONNECTOR MAXIMUM CABLE O.D
NPT ½” HP ¾ (0.750)
NPT ½” HP R/A ¾ (0.750)
NPT ½” LP ½ (0.500)
NPT ¾” HP ¾ (0.750)
NPT ¾” HP R/A ¾ (0.750)
NPT 3/4” LP ¾ (0.750)
NPT 1” HP 1 (1.000)
NPT 1” HP R/A 1 (1.000)
NPT 1” LP 7/8 (0.875)

Back to top

MINI-CON SERIES

TYPE OF CONNECTOR MAXIMUM CABLE O.D
MING-CCP 9/16 (0.562)
MING-CCP-R/A 5/8 (0.625)
MING-CCR 9/16 (0.562) CCP MOLD
MINK-CCP 7/8 (0.875)
MINK-CCP-R/A 5/8 (0.625)
MINK-CCR 7/8 (0.875) CCP MOLD
MINK-FCR-HP SIDE 3/8 (0.375)
MINK-FCR-HP SIDE R/A ½ (0.500)
MINL-CCP 1 (1.000)
MINL-CCP-R/A 5/8 (0.625)
MINL-CCR 1 (1.000) CCP MOLD
MINM-CCP ¾ (0.750)
MINM-CCP-R/A ¾ (0.750)
MINM-CCR ¾ (0.750) CCP MOLD
MINO-CCP 1 ¼ (1.250)
MINO-CCP-R/A ¾ (0.750)
MINO-CCR 1 ¼ (1.250) CCP MOLD
MINP-CP 1 (1.000)
MINP-CCP-R/A 27/32 (0.843)
MINP-CCR 1 (1.000)
MINP-PNT-HP SIDE
MINQ-CCP 1 ¼ (1.250)
MINQ-CCP-R/A 7/8 (0.875)
MINQ-CCR 1 ¼ (1.250) CCP MOLD
MINR-CCP 1 ¼ (1.250)
MINR-CCP-R/A 1 (1.000)
MINR-CCR 1 ¼ (1.250) CCP MOLD
MINS-CCP 1 3/8 (1.375)
MINS-CCP-R/A 1 1/8 (1.125)
MINS-CCR 1 3/8 (1.375) CCP MOLD
MINT-CCP 1 ½ (1.500)
MINT-CCP-R/A 1 ¼ (1.250)
MINT-CCR 1 ½ (1.500) CCP MOLD
MINU-CCP 1 11/16 (1.687)
MINU-CCP-R/A 1 3/8 (1.375)
MINU-CCR 1 11/16 (1.687) CCP MOLD

Back to top

RUBBER MOLDED CONNECTOR SERIES

TYPE OF CONNECTOR MAXIMUM CABLE O.D
RMA-VMA 7/32 (0.218)
RMA-VMA-R/A ¼ (0.250)
RMF 5/16 (0.312)
RMF-R/A 5/16 (0.312)
VMF 3/8 (0.375)
VMF-R/A 7/16 (0.437)
RMG-VMG-LMG 5/8 (0.625)
RMG-VMG-LMG-R/A 11/16 (0.687)
RMG-VMG-LMG-WOC ½ (0.500)
RMK-VMK ¾ (0.750)
RMK-VMK-R/A ¾ (0.750)
RMK-VMK-WOC ¾ (0.750)

NOTES:
List of the maximum O.D. of the cable for the rubber and polyurethane molding connectors.

Back to top